Відео

Thanks so much x2. Did this 2 years ago and had to do it again. Greatly appreciate your video as I watched it back then and most recently now. Some parts obviously look deceptively easy so for anyone doing this as a beginner - please reserve lots of time for trouble shooting.

Perfect thank you

Excelente!

That's good instead of overheating

Does this work on newer models of X5 too? Any ideas? THX!

Helpful video . I have 2 broken handles on my 2005×5 bmw

i opened mine today but did not find any connector to the yellow socket. What is it for? I only have the white and blue one on left and right side

hi, is this meant for kmh? how many teeth should the small gear have?>

i think there are many hears in the VDO meter. But the kit in Amazon only has 3?

Fucked up something in my car the fan now makes a loud noise. Do not do this unless you know what you are doing. I think it sucked up a small amount of the paper towel i was using to wipe up the residual.

How has this cluster lens aged over the years? Did the polish have any aging/yellowing effects on the lens?

Mark, do you think this will fix a TransFail Safe Prog message. Scan tool says P0732 Gear 2 Incorrect Ratio. It won't shift into 2nd gear and then go into Transfail Safe Mode and stays in 5th gear.

Tqvm

Cool video 8 years old and still so helpfull. Thanks

Maestro un vídeo bajando el tanque de combustible

Can this part cause heavy smoke? (Bmw e46 318i . 2002 . 105kw)

I found it easier to take that brass fitting off by pushing it up towards the stop then use a very small flathead screwdriver to get in front of the collar and you can slide it right off.

question;; I have a 1999 bmw 528i, about 170,000 miles. i just started having issue with i hope is the oxygen sensors, Can you tell me, are the 2 you replaced both the same sensors? if not can you tell me what i need to get, thx in advance

on my car, turned out that just the cable balljoint came off 😂 i've put a zip tie to make sure it doesn't come off again. thanks for the instructions @bimmerzeitt! very helpful, only thing i was missing is that for the top clips on the doorcard (just under the window) i needed to really put pressure towards the inside of the car to get the doorcard off

was wondering if both sensors are the same for front and rear of engine

My 528 is doing the same noise just helped me thanks

Does this mean every time the 4x4 light comes on it’s the transfer case motor gear that needs changing ? If yes I don’t necessarily have to buy the whole transfer case right?

Is this the same for 328xi? I got all the symptoms

That aint no fix. Youre just ripping it...

Thank you! I thought I'd need the dash cluster for $1,500, but it seemed weird that the warning/computer display worked perfectly and the top row was almost completely dark. I just swapped uppers for lowers before spending any money and mileage now shows but warnings don't. I just need a few new bulbs and another ten minutes to fix it.

Dude! Thank you 🙏

You into mercedes now? Whyyy 😢

This SBC brake pump is evil...I don't know how Mercedes could release something like this...a pump that breaks down after a certain number of brake pedal presses. As a new part it costs a fortune...

Thumbs up if this video has become your go-to source of inspiration and motivation!

iCarSoft MB Scan Tool I use: amzn.to/4c10C10

I have a 2000 BMW 323i and need to top up. - not sure what to use.

Just spray on the shit and use a leather brush or interior brush and then wipe clean with a towel.

a

Ok i didn’t get it. I’m trying to diagnose and in my case i have way less sucking but when i remove the cap the car shuts down in few seconds after struggling to idle. Is that bad ccv or not?

Awesome video, great direction. Thank you

It works!

Do also sell for 2 series gran tourer 2016 automatic?

Hello friend I have a problem when starting the car is delayed, and the other problem is that I smell a smell of shacman, but there is no smoke appearing, what is the solution?

This help me real gud

Good. Thanks.

Can this be used on mercedes amg models?

AMG official Amazon store: amzn.to/4aESaDl

I did a 9/10 job. I kind of ducked up at the end with the coating. First off people please use the glove. I didn’t and my hand is sticky af even after washing with soap and even spraying some of that spray provided in the kit. Second be generous with the coating on the paper towel. I wasn’t so I went over it again and it just smeared. I wasted like half the bottle on one headlight trying to correct it😂. The second headlight was a breeze after learning from my mistake. Also how do I remove that the coating from my hand? Asking for a friend.

Thanks for the info. Just did mine with your help.

I get covering it up but why Allens I mean if u have to jump it thats gonna be the one tool or mm you don't have

I love to see 269k and counting on that odometer!

If I wanted to put a after market radio, what would you recommend for like radio and bracket.

Great informative video

As a Brazilian guy I appreciate these American DIY videos, good job! We don't have that culture here, in the minor problem we take the car to the mechanic due the lack of knowledge!

the fan motor axle was rusty, putting some lubricant was probably needed, finally we did not see the problem since you did not demonstrate the fan motor rotation and speed before and after